LNL Logo

Return to How -To Page

BNC 3 Piece Solder Type

Termination Instructions
for Cable Types RG-58, 59, 62, 223

Step 1
2B1.gif Slide clamp nut over cable. Strip cable to dimension shown. Cut braid and dielectic square. Do not nick center conductor.

Step 2
2B3.gif Slide contact assembly under braid and jacket until braid butts as shown. Use caution that braid slides over contact assembly and not inside of it. Be sure center conductor is visible through side hole of contact. Solder contact to center conductor. Contact may be crimped on applicable connectors.

Step 3
2B3.gif Insert into connector body.

Step 4
2B4.gif Tighten clamp nut to a torque of 35 lbf-in.

Return to How -To Page